XpertLog® SCADA

XpertLog® SCADA is an interface between real time data loggers and SCADA/HMI, to display real time data on this type of interface.

Quote Request

PurposeInterface XpertLog® real time data loggers with the SCADA/HMI of an equipment
Display XpertLog® real time data on SCADA / HMI
ApplicationsInterface SCADA/HMI of autoclaves, freeze dryers, etc. with XpertLog® real time data loggers inside the equipment.
ScopeHelp users to meet FDA requirements with regards to Continued Process Verification
Gain ongoing assurance during routine production that the process remains in a state of control
Minimize time needed for parametric release of a sterile load after sterilization cycle
Display real time behavior of the equipment using a third party system - XpertLog®
Detect real time anomalies of product probes and allow users to take action
FunctionalityCollect temperatures/pressures from XpertLog® real time data loggers and display simultaneously with the product probes on the SCADA/HMI
Technical Specifications
Minimum recommended acquisition interval:10 sec
Maximum number of loggers: 20
Accuracy:Temperature: ± 0.1°C
Pressure: ± 10 mbar @ 2 bar abs.
Data integrity:21 CFR Part 11 compliant
PLC compatibility:Any PLC model
Measurement range: Temperature: -60 to 140°C
Pressure: 0.01 to 5 bar abs.
Memory capacity:32,000 data points -16,000 p / 16,000 temp.
Battery lifetime:Up to 6 months - based on usage
Internal clock drift:4 sec / 24 h @ +23°C
Access Point:USB connection
Material:Peek 1 - FDA compliant
Radio frequency:2.4 GHz ISM band
Calibrations:Factory: Traceable NIST / COFRAC - ITS-90 coefficients stored in the internal memory
User: Close loop calibration, using XpertLog® software
Certification:EMC: EN 60601-1-2 / 2007
RF: EN 300440-2 v1.3.1 (2009-03)
Health Safety: EN 60950-1/2006