You may have noticed that Lives International has a new look. We’ve redone our website to make the experience of finding the perfect datalogger an easier one. The new Lives International is committed to making sure your thermal mapping and temperature tracking needs are met with no stress. Take a look at the site to see what we’ve got in store for you!

Use of heat is quintessential for pharmaceutical and biopharmaceutical processes and impacts the critical quality attributes (CQA) of pharmaceutical products. Heat is used for cleaning, sterilization and specific unit operations involving a large variety of equipment which must be maintained in a state of validation throughout the product life cycle (development, transfer, validation, commercial manufacturing ...)

XperTrack® GPS Cold Chain Tracking Device

-30 to +60°C

XperTrack® allows you to remotely control your cold chain shipments.

Range extender that allows you to increase the coverage area of the Access Point

Type R Thermocouples

-50 to +1480°C

R type thermocouples, or platinum rhodium thermocouples have a low sensitivity (~10 µV/°C) and because of the high cost, they are used mostly for very high temperature applications. Their temperature measurement capability ranges from -50®C up to 1480®C.

Type T Thermocouples

–250 to 350°C

Type T thermocouple is a stable thermocouple, with very good repeatability, often used in low/very low temperature applications.

Type J Thermocouples

-40°C to 750°C

Type J thermocouples, or iron–constantan thermocouples have a quite narrow range (from −40 °C to +750 °C) but have a higher sensitivity of about 50 µV/°C. The upper limit of this type of thermocouple is determined by the Curie point of the iron, which is 770 °C.

Type K Thermocouples

-200 to +1250°C

The type K thermocouple is accurate, reliable and it covers a wide temperature range (from –200°C to 1250°C). It's inexpensive and is the most common type of thermocouple.

XpertVal 60

-200 to +1200°C

60 Channels (3x20) thermocouple based system for thermal mapping and validation.