MH-100 MicroSENS IR Incubator CO2 Sensor

XpertLog® Software controls all systems manufactured by Lives International®: real time wireless data loggers, standard wireless data loggers, standard data loggers, continuous monitoring data loggers, mapping wireless data loggers, local monitoring data loggers, thermocouple based systems.

T and J type thermocouples for use with thermocouple systems like XpertVal 60.

Module for conecting thermocouples to XpertVal data logger

EN285 compliant triclamp pressure transducer to connect on the autoclave during validations

Feedthrough assembly to pass 20/30 thermocouples into autoclaves. Used for thermocouples system calibration and validation.

Type R Thermocouples

-50 to +1480°C

R type thermocouples, or platinum rhodium thermocouples have a low sensitivity (~10 µV/°C) and because of the high cost, they are used mostly for very high temperature applications. Their temperature measurement capability ranges from -50®C up to 1480®C.

Type T Thermocouples

–250 to 350°C

Type T thermocouple is a stable thermocouple, with very good repeatability, often used in low/very low temperature applications.

Type J Thermocouples

-40°C to 750°C

Type J thermocouples, or iron–constantan thermocouples have a quite narrow range (from −40 °C to +750 °C) but have a higher sensitivity of about 50 µV/°C. The upper limit of this type of thermocouple is determined by the Curie point of the iron, which is 770 °C.

Type K Thermocouples

-200 to +1250°C

The type K thermocouple is accurate, reliable and it covers a wide temperature range (from –200°C to 1250°C). It's inexpensive and is the most common type of thermocouple.