Features | |
---|---|
Purpose: | Interface XpertLog® real time data loggers with the SCADA/HMI of any equipment Display XpertLog® real time data on SCADA / HMI |
Applications: | Interface SCADA/HMI of autoclaves, freeze dryers, etc. with XpertLog® real time data loggers inside the equipment. Can be used to control the equipment based on Real Time Wireless Data Loggers* |
Scope: | Help users to meet FDA requirements with regards to Continued Process Verification Gain ongoing assurance during routine production that the process remains in a state of control Minimize time needed for parametric release of a sterile load after sterilization cycle Display real time behavior of the equipment using a third party system - XpertLog® Detect real time anomalies of product probes and allow users to take action |
Functionality: | Collect temperatures/pressures from XpertLog® real time data loggers and display simultaneously with the product probes on the SCADA/HMI * applies under conditions, call to discuss application and implementation |
Technical Specifications | XpertLog SCADALVSC.3.2.0 - January 2022 |
---|---|
Minimum recommended acquisition interval | 10 sec |
Maximum number of loggers | 20 |
Measurement range | temperature: -60°C to 140°C pressure: 0.01 to 5 BarA |
Accuracy | ±0.1°C ±10 mbar @ 2 BarA |
Data integrity | 21 CFR Part 11 compliant |
PLC compatibility | Any PLC |
Memory capacity | 16,000 temperature / 16,000 pressure |
Memory type | non volatile |
Battery lifetime | Up to 6 months, based on usage |
Internal clock drift | 4 sec / 24 h @ 23°C |
Access point | USB to computer |
Radio frequency | 2.4 Ghz ISM band |
material | Peek 1000 - FDA compliant |
enclosure | IP-68 |
Calibrations | Factory Calibrations: : traceable NIST/COFRAC - ITS-90 coefficients stored in the internal memory User Calibrations: : closed loop calibration using XpertLog® software |
Certifications | EMC: EN 60601-1-2 / 2007 Health Safety: EN 60950-1 / 2006 RF: EN 300440-2 v1.3.1 (2009-03) |
RF Loggers To SCADA Documents
No document available.