GMP

Standard Temperature Data Logger

-90 to +140°C

Standard data loggers for recording temperature values. Easy to program and install, no data loss during validation process, multiple users can share the same database simultaneously. Remote factory calibration on users site.

Quote Request

Xpertlog® GMP elevates thermal validation process to a whole new level:
Highly efficient: increase production efficiency by cutting down validation time
Highly reliable: real time data during validation process
Network ready: multiple users, centralized, server database, active directory authentication
Impressive accuracy: ±0.1°C from -90°C to +140°C.

Characteristics GMP LVSC.3.1.7 - March 2020
Sensor element 4 wires PT-100
- rigid 150 mm (6”)
- customized 480 mm (19”)
- sensor size1.5 x 8 mm (0.06 x 0.315”)
- cross section1.77 mm2 (0.0027 inch2)
Operating Range
- standard -90 °C to +140 °C
- extended -90 °C to +350 °C (with thermal shield)
Accuracy ±0.1°C from -90 to 140°C
Memory capacity 32,000 data points
Sampling rate 1 sec to 24 hours
Internal clock drift 4 sec / 24 h @ 23°C
Logger update rate 5 sec to 24 h - user configurable
Mechanical
- material Peek 1000 - FDA compliant
- enclosure IP-68
- weight 115g (4.06 oz)
- diameter 65 mm (2.56")
- height 55 mm (2.17")
Power 2 x Lithium batteries
0.35 g/each Lithium content
classified UN3091 under IATA DGR section 3.9.2.6
compliant with ICAO/IATA packing instructions 970
user replaceable
Battery lifetime Up to 6 months, based on usage
Wireless range 121 m (400 feet) line of sight
Radio frequency 2.4 Ghz ISM band
Calibrations Factory:
User:
traceable NIST/COFRAC - ITS-90 coefficients stored in the internal memory
close loop calibration, using XpertLog® software
Certification FMC:
RF:
Health Safety:
EN 60601-1-2 / 2007
EN 300440-2 v1.3.1 (2009-03)
EN 60950-1 / 2006

Documents

Datasheet
More in this category: « GMP SW GMPL »