GMP SW

Temperature Data Logger for Stopper Washers

-90 to +140°C

Standard data logger for capturing temperature values inside stopper washers. Easy to program and install, highly reliable (no data loss), high accuracy (±0.1°C)

Quote Request

Xpertlog® GMP simplifies and makes the thermal validation process more efficient:
High efficiency: easy to program and install, pre-calibration not needed
High reliability: no data loss during validation process
Network ready: multiple users, centralized, server database, active directory authentication
High accuracy: ±0.1°C from -40°C to +140°C.
Data integrity: FDA 21 CFR Part 11

Characteristics GMP SW LVSC.3.1.7 - March 2020
Sensor type 4 wires PT-100
- rigid 20mm (0.8")
- sensor size 1.5 x 8 mm (0.06 x 0.315”)
- cross section 1.77 mm2 (0.0027 inch2)
Operating range
- body temp. -40 °C to +140 °C
- sensor temp. -40 °C to +140 °C
Accuracy ±0.1°C from -40 to 140°C
Resolution 0.01°C
Memory capacity 32,000 data points temperature
Sampling rate 1 sec to 24 hours
Internal clock drift 4 sec / 24 h @ 23 °
Mechanical
- material Peek 1000 - FDA compliant
- enclosure IP-68
- weight 91g (3.21 oz)
- diameter 50 mm (1.97")
- height 40 mm (1.57")
Power 1 Lithium battery
0.35 g Lithium content
classified UN3091 under IATA DGR section 3.9.2.6
compliant with ICAO/IATA packing instructions 970
user replaceable
Battery lifetime Up to 12 months, based on usage
Docking station USB connection
4, 8, 12 and 20 ports available
programs and reads unlimited number of loggers
Calibrations Factory:
User:
traceable NIST/COFRAC - ITS-90 coefficients stored in the internal memory
close loop calibration, using XpertLog® software
Standard Calibration Points -40°C
0°C
140°C
CertificationEMC:
Health Safety:
EN 60601-1-2 / 2007
EN 60950-1 / 2006

Documents

Datasheet
More in this category: « GMPF LP GMP »